Hydropool Energy Efficiency
Self-Cleaning Technology Energy Efficiency Zone Therapy Comfort & Design
HYDROWISE ENERGY EFFICIENT TECHNOLOGY
Make An Informed Decision About Your Long Term Investment
How much does it cost to run a hot tub? Are hot tubs expensive to run? These are some of the most frequent questions we’re asked. Now more than ever, swim spa and hot tub running cost is a key factor in deciding whether or not to purchase. The perception is that a hot tub or swim spa will send your electricity bill through the roof because, with many hot tub brands, it is often the case.
The actual cost of running a hot tub or swim spa depends on factors such as product specification, location, usage, quality of maintenance, and your energy tariff. The excessive running costs that people fear are associated with poor quality, poorly insulated products.
Hydropool hot tubs and swim spas are engineered to be the most energy efficient in the world, providing 100˚F / 37˚C for pennies a day. Thanks to the development and ingenuity of our HydroWise Thermal Shield Energy Insulation, along with our superior 4-inch HydroWise Hard Cover, we’ve mastered the art of keeping the heat in and the cold out.
ENERGY EFFICIENCY BEYOND COMPARE
How Do We Do It?
ENERGY EFFICIENT FILTRATION
Your Hydropool hot tub filters 100% of the water in only 15 minutes, and only 40 minutes in swim spas. This means less time operating as other hot tubs. Our low amp Evergreen Pumps are designed to produce high flow rates with low energy consumption, making them 26% more efficient than our competition.
HYDROWISE HEAT SHIELD HARDCOVER
Made for Canadian Winters and inspired by NASA technology, the Hydropool heavy duty tapered locking safety hardcover has an insulated baffle in the fold area that locks the heat in and keeps the cold out.
INSULATED THERMAL SHIELD BLANKET
Our Triple Thermal Shield Technology (pipe work, cabinet and floor) employs a reflective foil on the side of the hot tub that reflects the heat back into the unit, and a black side on the outside of the pipes that’s designed to absorb heat.
ECOHEAT EXCHANGE TECHNOLOGY
Fully adjustable venting. Each pump creates 1.5 kw of waste heat, and our Double Thermal Shield blanket reflects that heat back into the hot tub cavity. HydroWise Thermal vents maximize energy efficiency for any season and any climate.
1. EXTEND 2. PROTECT 3. SAVE
Setting The Standards For Energy Efficiency
HydroWise technology has been designed to exceed state of California Regulations which are some of the stiffest regulations in the world. All Hydropool products are TUV and CE certified. Hydropool is ranked one of the top in the world for “stand-by” wattage and energy efficiency and one of the first to be approved under the strict State of California Guidelines. We are literally setting the standard.1. Extend the life of your water HYDROPOOL SELF-CLEANING TEHCNOLOGY
Our patented self-cleaning system filters 100% of the water in only 40 minutes in swim spas, and only 15 minutes in hot tubs. That’s an incredible 8 times in just 2 hours – the most efficient in the world! It’s innovation throughout the entire system.| 1. Hydropool Filtration Jets OPTIMISED SURFACE FILTRATION | 2. High Flow Skimmer & Pre-filter TOTAL SURFACE CLEANING |
| 3. HydroClean Floor Vacuum DEEP FLOOR CLEANING | 4. Pressurised Micro-Filtration CLEANS 100% OF THE WATER IN MIMUTES |
| 5. PureWater System ADVANCED PURIFICATION SYSTEM | 6. Self-Clean Indicator ALWAYS ON THE JOB |
2. Protect your hot tub water from the cold extremes HYDROWISE HEAT SHIELD COVER
MADE FOR CANADIAN WINTERS- Four inches thick in the middle and tapers to three inches on each end
- Insulated bumper along the fold area of the cover.
- Supports up to 250lb.
- Prevents heat loss (80% of all heat is lost through the cover).
- Safety Locks on both sides.
Protect your hot tub water from the cold extremes THERMAL SHIELD BLANKET
R – VALUES FOR VARIOUS INSULATION:| CLOSED CELL FOAM | R 5.5 |
| OPEN CELL FOAM | R 4.3 |
| AYR-FOIL A2V FOIL | R14 – R16 |
- Triple Thermal Shield protection (pipes, cabinet, floor).
- Traps the waste heat from the motor, pipes and shell, and reflects the heat back into the water.
- Black Pipe Technology absorbs heat.
- NASA inspired technology
3. Save money by keeping the cold out and the warm in THERMAL ECO HEAT EXCHANGE
INCREASE MOTOR PERFORMANCE AND DURABILITY With such an effecting insulation system, what happens to all that heat in the summer? Located on either side of the cabinet, adjustable thermal vents allow for cross ventilation across the motor area during hot summer months and lock heat in the winter. Each pump creates 1.5 kw of waste heat and our double thermal shiel blanket reflects the heat back into the hot tub cavity. Hydrowise Thermal Vents maximise energy efficiency for any season and any climate. VENTALATES DURING HOT SUMMERS, LOCKS THE HEAT IN DURING WINTER
What Are The Most Common Issues With Other Forms Of Insulation?
‘FULL FOAM’ THERMAL IMAGING
No Motor Heat Recovery
‘FULL FOAM’ HOT TUB PROBLEMS
Restrictive Access To Plumbing
Hot tubs and swim spas have a vast network of plumbing. It’s only a matter of time before a gasket, seal, or fixing needs to be replaced. The easier it is to access this network, the better – without compromising the integrity of the product and making a mess of your area.
As a hot tub or swim spa owner, you may have to deal with a leak during the lifetime of your product. If your hot tub or swim spa has a full foam cabinet, this presents a messy access (dig) through soggy foam until the source of the leak can be found.
If you have a hot tub or swim spa with full foam insulation, you will begin your search for a leak by removing wet foam until the source of the leak can be found, followed by a messy clean-up, as well as the inconvenience and expense involved.
‘PERIMETER FOAM’ THERMAL IMAGING
Excessive Heat Loss
‘PERIMETER FOAM’ HOT TUB PROBLEMS
Insufficient Pipework Support
Experience The Difference With A Hydropool
HYDROWISE THERMAL SHIELD
The World’s Most Energy Efficient Hot Tubs & Swim Spas
OUR EVERGREEN COMMITMENT
